By Brands

Brands

  • Filter
  Name SKU Description Category
Sew ST-360TRn FEATURES ● Easy to read 3-color scale...for mistake proof reading.● Mirror scale...makes reading pointer easy.● Fuse protection function.● Safety fused...on all ranges.● Diode protected meter...prevents damage due to overload.● hFE and db measurement.● With stand...makes reading and measuring easy.     SPECIFICATIONS         DC volts 0-0.1 / 0.5 / 2.5 / 10 / 50 / 250 /... Analogue Multimeters
Sew AL-24-1 Wire : PVC UL 1803 / 18AWG.     length : 1100±30mm    Out diameter : 3.50mm    Temperature tolerance range : -40ºC~105ºC    Braid copper wires : 64 / 0.12mm● Terminal :    Right angle 4mm brass (nickel plated) banana plug with    caged and insulated sheathing to avoid the brass oxidation.● Rating :    EN 61010-031:2002 + A1:2008    CAT III 1000V 10A / CAT IV 600V 10A Test Leads
DKK-TOA MWB4-70 B4 size compact analyzer excellent in reliability, durability and maintainability Enables continuously measurement of turbidity, color, residual chlorine, pH, conductivity, temperature and pressure without reagents Equipped with interactive easy-to-use color touch panel Automatic Water Quality Analyzer for City Water
DKK-TOA XAT-200 series Process analyzer for automating analytical techniques such as atomic absorption and etc. Suitable for automating chemical analysis processes such as distillation, heat treatment, etc. Example applications:  *Total chromium  *Total cyanide by atomic absorption/distillation  *Phenols by atomic absorption/distillation  *Total mercury by oxidation-reduction atomic absorption Automatic Process Analyzer
DKK-TOA OBM-102A Panel type DO analyzer in a compact DIN 96 size One-touch calibration and various self-diagnostic functions 2-point contacts signal, 4 - 20mA output (RS-232 optional)  Power supply: 90 - 264VAC, 50/60Hz Meas. range Minimum : 0 - 1 mg/L Maximum: 0 - 50 mg/L Panel Type DO Analyzer
Sew LS-110 SYNC (120V) LS-110 SYNC (240V) FEATURES ● Input Voltage : 120V AC or 240V AC.● Standard 4.5-inch switchboard case.● Front panel mount.● 3 bi-colored LED indicators for "SYNC", "GEN" and "BUS".● 24 LEDs in a circle display the phase angle and the frequency differences between 2 networks.● 360° LED indication.● 12 o'clock position LED is bi-colored.     SPECIFICATIONS          LS-110 SYNC ... LED synchroscope
DKK-TOA MDM-135A (2-wire) Electromagnetic Conductivity Transmitter MDM-135A (2-wire) Electromagnetic conductivity analyzer for field installation in a compact and rigid aluminum enclosure  Made for accurate measurements for high conductivity corrosive solutions (such as strong acid/alkali) Alterable output range Meas. range Minimum : 0 - 2 mS/cm Maximum : 0 - 2000 mS/cm Transmitter for Electromagnetic Conductivity Analyzer
DKK-TOA AQM-100A Resistivity Analyzer for Ultra-Pure Water AQM-100A Compact DIN 96 size Best suited for water quality control in ultra-pure water production lines  Two detectors connectable Meas. range 0.00 - 20.00 MΩ・cm Panel Type Resistivity Analyzer for Ultra-Pure Water
DKK-TOA WDM-135A (2-wire) / WDM-136A (4-wire) Industrial Conductivity Transmitter WDM-135A (2-wire) / WDM-136A (4-wire) Easy-to-use conductivity analyzer for field installation in a compact and rigid aluminum enclosure Wide application range from ultra-pure water to wastewater  Alterable output range Meas. range Minimum: 0 - 0.2 μS/cm Maximum: 0 - 20 mS/cm Transmitter for Industrial Conductivity Analyzer
Sew 4136 mO FEATURES ● Microprocessor-controlled.● Four terminal measurement.● Measures down to 100μΩ.● 5 Ranges from 200.0mΩ to 2000Ω.● Maximum resolution of 100μΩ.● Three test currents with over-temperature protection.● Protection against inadvertent connection to over voltage.● Large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave inside.● EnerSave Auto hold.● EnerSave Auto off.● Lightweight, robust &... Milliohm Meters
Hioki Bare Board HiTester 1231-11 Semiconductor Package Board Testing System Utilizing Index Table Method The 1231-11 is an IC package board tester that features high-precision, large-pin capabilities for high-density, fine-pitch boards. Bare Board Testing
Sew 1824 LP FEATURES ● Microprocessor-controlled.● Measures Earth Resistance without the need for poles    in the ground or external measuring wires.● Earth measurement uses the real earth current path   and the current generated by the electric network,   without the need for any disconnection.● The Earth Resistance displayed is exactly the earth   resistance that the earth current will need to... Loop Testers
DKK-TOA HDM-135A(2-wire)/HDM-136A(4-wire) Industrial pH Transmitter HDM-135A(2-wire)/HDM-136A(4-wire) Easy-to-use pH analyzer for field installation in a compact and rigid aluminum enclosure Easier calibration done with standard solution Auto determination of electrode deterioration Alterable output range Automated self-diagnosis of fault (burn-out output) Meas. range -1 - 14 Transmitter for Industrial pH/ORP Analyzer
Sew 1151 IN FEATURES ● Microprocessor-controlled.● Automatic voltmeter AC/DC at Start/Reset.● Auto range● Auto off.● Battery test.● Battery test at Switch ON/Reset.● Safety voltmeter before each test.● Auto discharge on all test and all ranges.● Leads Auto-null key.● Test Auto-stop.● Smart hold & stop on voltmeter ac/dc.● Ener-Save feature to extend battery life.● Continuity short circuit current > 220mA.● Continuity open circuit voltage of 5Vdc.● Nominal... Insulation & Multifunction Testers (LCD Display)
Tenmars ST-105 Model No.: : ST-105 Product Description - Statistic analysis. - 24HR measurement. - Integral measurement. - Real time analyzer in 1/1 and 1/3 octave band. - Simultaneously measures A, C, Z and F, S, Impulse. - Measurement function: Lxyp, (Lxyi), Lxeq,1s, Lxeq, T, LAE, E,Cpeak+, Cpeak- , LAFmax, LAFmin, LAFeqT, LASeqT, LAIeqT, Laeq(20Hz~200Hz). - USB Datalogger with 128 records capacity. - Real time clock with calendar. - Sampling Frequency: 20.8us(48KHz). - Wide Frequency range: 10Hz~20KHz.... Class 1 Integrating Sound Analyzer Meter
Sew TEL-1-1 110V FEATURES ● The TEL1 is the Basic Test Equipment an Electrician cannot do   without. TEL1 is a Dual Function Test Instrument utilized to Verify   Electrical Wiring Connections and the Functioning of Earth Leakage   / Residual Current Detectors devices by forcing the ELCB/RCD to   trip.     SPECIFICATIONS         Nominal Voltage System 110V-220V-230V-240Vac... General ELCB Testers
DKK-TOA HM-30P / 31P Standard model for pH measurement (HM-30P) Sophisticated type, capable of pH and ORP measurements (HM-31P) Power-saving design; rechargeable battery adaptable Waterproof design (IP67: 1m depth, up to 30mins) Data storage up to 1000 points  Meas. range pH 0 - 14 (HM-30P/31P) 0 - 100.0 degrees C (HM-30P/31P) 0 - ±2000 mV (HM-31P) (ORP electrodes sold separately) Handheld pH/ORP Meter
Sew 890 PR FEATURES ● The 890 PR is a Non-Contact phase detector    with flashing LEDs and a beeping buzzer to    show the detection of AC 3-phase sequence.● Two functions in one unit : open phase and     phase sequence detection.● Convenient brightness switch to make the    indication visible in dim areas or sunlight.● Back cover magnet attaches the instrument to   the AC distribution panel offer easy measurement.● 3-Phase... Non-Contact Type Phase Sequence Indicators
3B5700 150°C ½ AA High Temperature Battery Data Logger Batteries
Sew ST-375 FEATURES ● Designed for measuring AC current, AC voltage resistance and DC   voltage .● Rotary scale which presents only one scale in windows at one time   to avoid any possible reading errors.● Pointer lock function freezes the reading in dimly lit or hard to reach   places.● Ω range ideal for checking the continuity or relays, transformers and   motor coils.    ... Rotary Scale Clamp Meters