testo 320

testo 320 flue gas analyzer; incl. O2-/CO sensor without H2-compensation, incl. calibration protocol; graphic display;

  • High-resolution graphic display
  • TÜV-tested according to EN 50379, Parts 1-3
  • Sensor exchange by the user
  • Memory up to 500 measurement protcols

Are you looking for a multi-function instrument for efficient flue gas analysis? Which confidently solves every task on a heating system? And is still convenient to use? The new testo 320 fulfils all of these requirements, because that is exactly what it was developed for. The testo 320 has a high-resolution colour display which presents the measurement results graphically. It provides simple, self-explanatory measurement menus. The testo 320 is very robust, ergonomic, and at the same time aesthetically designed. It has two sensors for O2 and CO as well as a temperature probe integrated into the flue gas probe for the direct measurement of temperature, O2 and CO. From these data, the instrument calculates all relevant flue gas measurement parameters such as CO2 value, degree of effectivity and flue gas loss. Direct draught or pressure measurements are additionally possible. Using the fine pressure probe, the flue draught or gas pressure values can optionally be measured parallel to the flue gas measurement. - TÜV-tested according to EN 50379, Parts 1-3.

Applications:
- Flue gas measurement
- Draught measurement
- Gas flow and static gas pressure
- Gas leak detection
- Ambient CO measurement
- Differential temperature measurement

  Measuring range Accuracy ±1 Digit Resolution Adjustment
time t90

Temperature

-40 to +1200 °C Accuracy: ±0,5°C (0 to 100°C)
Accuracy: ±0.5% of m.v. remaining range
0.1 °C -40 to +999,9°C
1°C; from +1000°C:
 

Draught measurement

-9.99 hPa to +40.00 hPa ± 0.02 hPa or
± 5% of m.v. (at -0,50 to +0,60 hPa)
± 0.03 hPa (0.61 to 3.00 hPa)
± 1.5% of m.v. (at 3.01 to 40.00 hPa))
0.01 hPa with fine draught option 0.001 hPa  

Pressure measurement

0 to +300 hPa ±0.5 hPa (0.0 to +500 hPa)
± 1 % of m.v. (at 50.1 to 100.0 hPa)
± 1,5 % of m.v. (at 100,1 to 300,0 hPa)
0.1 hPa with fine pressure option 0.01  

O2measurement

0 to 21 vol.% ± 0.2 vol.% 0.1 vol. % < 20 sec

CO measurement
(without H2 compensation)

0 to 4000 ppm ± 20 ppm (0 to 400 ppm)
± 5% of m.v. (401 to 2000 ppm)
± 10% of m.v. (2001 to 4000 ppm)
1 ppm < 60 sec

CO measurement
(H 2-compensated)

0 to 8000 ppm ± 10 ppm or +/-10% of m.v. (0 to 200 ppm)
± 20 ppm or +/-5% of m.v. (201 to 2000 ppm)
±10% of m.v. (2001 to 8000 ppm)
1 ppm < 40 sec

Efficiency testing (Eta)

0 to 120 %   0.1 %  

Exhaust gas loss

0 to 99.9 %   0.1 %  

CO 2 -determination
digital calculation from O2

0 to CO 2 max ± 0.2 vol.% 0.1 %  

Option CO low -measure-
ment (H2-compensated)

0 to 500 ppm ±2 ppm (0 to 39 ppm)
±5% of m.v. (40 to 500 ppm)
0.1 ppm < 40 sec

Ambient CO measurement
(with CO probe)

0 to 500 ppm ±5 ppm (0 to 100 ppm)
±5 % of m.v. (>100 ppm)
1 ppm  

Gas leak measurement for combustible gases (with
gas leak detector probe)

0 to 10.000 ppm
CH 4 / C 3 H 8
Signal
Optical display (LED)
Audible alarm via buzzer
  < 2 sec

Ambient CO2measurement
(with ambient CO 2 probe)

0 to 1 vol. %
0 to 10,000 ppm
± 50 ppm or ±2% of m.v. (0 to 5000 ppm)
± 100 ppm or ±3% of m.v. (5001 to 100000 ppm)
 

General technical data

Storage temp.

-20 to +50 °C

Oper. temp.

-5 to +45 °C

Power supply

Rech. batt.: 3.7 V / 2400 mAh Mains unit: 6 V/1.2 A

Memory

500 readings

Display

Colour graphic display with 240 x 320 Pixel

Weight

573 g

Dimensions

L 240 x W 85 x H 65 mm

Warranty

Instrument/probes/gas sensors: 24 months
Rech. batt.: 12 months

 

 
testo 310

testo 320

testo 330 LL

Measurement parameters

O2

0 to 21 % 0 to 21 % 0 to 21 %

CO

0 to 4000 ppm 0 to 4000 ppm 0 to 4000 ppm

Option: CO H2 compensated

false 0 to 8000 ppm 0 to 8000 ppm

COlow

false 0 to 500 ppm 0 to 500 ppm

NO

false false 0 to 3000 ppm

NOlow

false false 0 to 300 ppm

Differential pressure

0 to 40 hPa 0 to 300 hPa 0 to 300 hPa

Temperature

0 to 400 °C -40 to +1200 °C -40 to +1200 °C

Additional applications

Flow, system, static and jet pressure

true true true

Gas leak probe

false true true

Probe for ambient
CO measurement

false true true

Solid fuel measurement

false false true

Tightness test
on gas pipes

false false true

Instrument technology

Display

2-line segment Colour display Colour display

Communication

IR IRDA / USB / BT IRDA / USB / BT

Printer integration

true true true

Sensor diagnosis

false true true

Connection to PC or laptop

false true true

Sensor exchange by user

false true true

Measurement report memory

false 500 500.000

Warranty

2 years 2 years 4 years

 

Ask about this product