|
CENTER TP-K01 K-Type general purpose bead probe
|
|
Features:
Measurement range: -50 to 200°C; -58 to 392°F
Tolerances: ±2.2°C (±3.9°F)
|
Thermal_Probes
|
|
|
GW INSTEK PCS-1000
|
|
Features
- 6 1/2 Digit measurement resolution- Dual measurement for Voltage and Current- AC&DC Current measurement range:30mA/300mA/3A/30A/300A(Max)AC Voltage measurement range:200mV/2V/20V/200V/600V(Max)DC Voltage measurement range:200mV/2V/20V/200V/1000V(Max)- Auto zero circuit- Standard Interfaces: USB, GPIB |
Precision Current Shunt Meter
|
|
|
GW INSTEK GDM-8261A
|
|
Features:
※ 6 1/2 Digit Display:1,200,000 counts※ DCV Basic Accuracy:0.0035%※ Dual Measurements to perform two selected measurements simultaneously※ Bright Vacuum Fluorescent Display (VFD)※ Provide AC+DC Voltage or Current Measurement Functions※ 11 Measurement Functions & 10 Math Functions※ High Resolution: Up to 100pA with DCI and 1nA with ACI Measurements※ Temperature Measurement (RTD & Thermocouple) from -200°C ~ +1820°C ※ High Transmission Speed: Up to 2,400... |
Digital Meters
|
|
|
Center CENTER 320 - Sound Level Meter
|
|
Our standard sound level meter CENTER 320 has a wide dynamic range from 30 to 130 dB. It has different frequency weighting A and C to respond to human sense or machine monitoring purposes. For different sound pattern, it also supplies Fast and Slow time constant setting. Analog output is also provided for other use. |
Sound_Meters
|
|
|
Center CENTER 340 - Thermo Recorder (Datalogger, Waterproof)
|
|
CENTER 340 is a temperature dataloggers. Even though these units are focused on data collecting, we placed a LCD to show the operator on site information. In case of dark environment, it is also equipped with backlit display. Both units feature a real time clock inside so that the event are captured with time stamps. The recording memory can hold up to 64000 records which can provide high resolution test results.
With waterproof hosing, the temperature datalogger 340 has a lot of... |
Recorders
|
|
|
Center CENTER 300 - Thermometer (K Type, PC Interface)
|
|
This series of thermocouple thermometers are micro controller based testers. With very intuitive interface, the user can fully operate the tester without second thought. They are digitally calibrated for long time stability. The whole series are equipped with PC interface for advance applications. |
Thermocouple
|
|
|
GW INSTEK GTL-105
|
|
Features
Max. Current 3AFor: GPR-U/H/M Series,GPC/GPS/PPE/PPS/PPT/PSS/PST-Series |
Accessories
|
|
|
GAS DNA GMS1000 Single -Channel digital controller for gas detector
|
|
GMS-1000 is one point digital controller which can be connected to only one(1) gas detector. Receiving analogue continuous signal from one (1) detector and converting it into digital signal, GMS-1000 provides various alarming and monitoring environment by micro-processor. Also, GMS-1000 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily... |
Digital Controller
|
|
|
Center CENTER 25 - Flexible Current Probe
|
|
Plug into multimeters, oscilloscopes, or power analyzers to measure AC current, up to 3000 A ac. Center 25 is also ideal for commercial or residential users who have standard clamp meters, but need to reach hard-to-clamp-on places, or occasionally measure AC current higher than 400 or 600 A. Center 25 simply eases your work. |
Flexible_Clamp
|
|
|
BANTE320 Portable pH/ORP/Ion/°C/°F Meter
|
|
Bante320 is a multi-parameter ion meter used for measuring the
ion concentration and pH value of liquids. The meter is equipped
with a BNC connecter that can connects various combination
Ion Selective Electrodes.
Features:
During the pH mode, Up to 5 points push-button calibration with auto-
buffer recognition.
Selectable pH buffer standards and temperature units.
Automatically calculates and displays electrode slope after calibration.
... |
Ion Meters
|
|
|
YOKOGAWA HANDY MULTIFUNCTION CALIBRATOR CA71
|
|
Signal source: DCV, DCA, Resistance, RTD, TC (10 kinds), Frequency, Pulse
Measurement: DCV, DCA, ACV, Resistance, RTD, TC (10 kinds), Frequency, Pulse
Features: Simultaneous signal source and measurement capacity, a wide array of useful functions, Easy operation, Online communication function
Options: AC adapter (94012: For 100V AC, 94013: For 120V AC, 94016: For 220-240V AC), B9108WA RJ sensor, B9108XA Accessory carrying case, 91017 Communications cable
|
CALIBRATORS
|
|
|
GW INSTEK GSP-930
|
|
Features
- Frequency Range: 9kHz ~ 3GHz- High Frequency Stability: 25ppb (0.025ppm)- RBW: 10Hz ~ 10kHz in 1-3 steps, 10kHz ~ 1MHz in 10% adjustable steps- Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset- Built-in Measurement Functions: Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO- Built-in Spectrogram and Topographic Display Modes- Gate Sweep Function- 1Hz Resolution Marker Counter- AM/FM Demodulation Analysis- 886MHz IF Output for User’s Extended Applications- Various... |
Spectrum Analyzers
|
|
|
GW INSTEK GRF-1300
|
|
Features
- Waveform Support :* Sine Wave: 0.1 ~ 3MHz* Square Wave: 0.1 ~ 3MHz* Triangle Wave: 0.1 ~ 3MHz- RF Frequency : 870 ~ 920MHz- AM Modulation & FM Modulation- 5 On/Off Switches and 5 Test Points to Simulate 8 Failure Conditions for Trouble-Shooting Study- USB Interface to Provide Remote Control |
RF Training Systems
|
|
|
LUTRON LM-8000A 4 in 1, Anemometer + Humidity meter + Light meter + Thermometer
|
|
Description: Anemometer, Humidity meter Light Meter, Type K Thermometer Model : LM-8000A* Humidity : 10 to 95 %RH,oC/oF * Anemometer : 0.4 to 30.0 m/s. * Anemometer unit : m/s, km/h, MPH, knots, ft/min, oC/oF. * Light : 0 to 20,000 Lux, 0 to 1,680 Ft-cd, auto range. * Type K Thermometer : -100 to 1300 oC, oC/oF. * Data hold, Record (Max., Min.) * Tiny bone shape with light weight and small size. |
LM-8000 SERIES
|
|
|
GW INSTEK ADP-001
|
|
Features:
* 50 ohms, BNC(J/F) - N(P/M)* For : GSP-Series |
Adaptors
|
|
|
GW INSTEK LCR-8000G Series
|
|
Features:
※ Wide Test Frequency 20Hz ~ 10/5/1MHz ※ 0.1% Basic Accuracy & 6 Digits Measurement Resolution ※ Large LCD Display with Intuitive Interface※ Full Measuring Functions with DUT V/I Monitor※ PASS/FAIL Function ( abs, % or delta) with Judgment Alarm※ DC Resistance Measurement ※ Multiple Step Mode※ Standard RS-232C/GPIB Interface※ Optional DC Bias box |
LCR Meters
|
|
|
GAS DNA PIR550 Non-Contact Portable Infrared thermometer
|
|
The thermometer is a non-contact infrared thermometer. It can measure from -60 to 550 ℃ (-76~1022 ºF) in the distance of 75:1 DS (Distance to Spot) ratio There are many mathematical modes for the Infrared function |
Portable Infrared thermometer
|
|
|
GAS DNA DA-50 Series SMART Gas Detector/Transmitter(4~20mA) with built-in LCD
|
|
DA-50 detects various combustible & toxic gases leaked from industrial areas for gas producers, gas users, gas reservoirs, gas by-producers, and so on, in order to prevent any accidents in advance. DA-50 converts digital signal into the 4-20㎃ standard current signal for output signal which can be transmitted to various external devices such as PLC, DDC, RECODER, and so on. Using these functions, you can easily construct the gas monitoring system more extensive as well as more... |
Gas Detector
|
|
|
YOKOGAWA 2100A SERIES SWITCHBOARD METER
|
|
RMS rectifier type, Mean rectifier type
Suspension type: Taut band suspension type
JIS C1102-2007, Class 1.5/2.5
Please specify model, full scale value and unit, cover color when ordering. |
ANALOG SWITCHBOARD INSTRUMENTS
|
|
|
YOKOGAWA OPTICAL TIME DOMAIN REFLECTOMETER AQ7280
|
|
Responding to the growing needs for reliable and ease-of-use field test instruments for installation and maintenance of fiber optic networks, Yokogawa AQ7280 Optical Time Domain Reflectometer (OTDR) is designed to empower field technicians to make fast and precise measurements with confidence.
The AQ7280 satisfies a broad range of test and measurement needs in analyzing optical networks from access to core. |
OPTICAL TIME DOMAIN REFLECTOMETER
|
|