|
Kyoritsu 9107
|
|
Applicablemodels
2000
2001
2012R
•
Carrying case
•
160 (L) × 103 (W) × 28 (D)mm
|
Case
|
|
|
Kyoritsu 3005A
|
|
Bargraph to display insulation resistance.
•
Displays the value of external AC voltage along with flashing symbol.
•
Auto null function to automatically subtract the test lead resistance before displaying the real continuity resistance value.
•
Live circuit warning beeper.
•
Releasing the test button automatically discharges the charges stored in the circuit under test.
•
200mA continuity measuring current to IEC 61557.
•
Minimum 1mA current... |
Digital Insulation / Continuity Tester
|
|
|
Kyoritsu 8016
|
|
Applicablemodels
7103
7139
7103A
7139A
7149
7150
7149A
7150A
•
Hook type prod
|
Clip etc.
|
|
|
Kyoritsu 3125
|
|
Wide range measurements from 500V to 5000V and up to 1000GΩ.
•
Large digital display with Bar Graph indication and back light.
•
Polarization Index measurement (PI).
•
Timer measurement function.
•
Indication of Output voltage and Discharge voltage.
•
Auto-discharge function and Voltage output warning function.
•
Auto power off and Battery Check.
•
Safety standard IEC 61010-1 CAT.III 600V
|
High Voltage Insulation Tester
|
|
|
Kyoritsu 8123
|
|
Applicable model 5010/5020
Conductor size
Φ55
Rated current
AC 1000A
Output voltage
AC 500mV/1000A (AC 0.5mV/A)
Accuracy
|±2.0%rdg±0.3mV (50/60Hz)|±3.0%rdg±0.5mV (40Hz~1kHz)
Withstand voltage
AC 5350V for 5 seconds
Cable length
Approx. 2m
Output connector
MINI DIN 6pin
Operating temperature ranges
0~40ºC, less than 85% RH (without condensation)
Output impedance
Approx. 1.5Ω
Applicable standards
IEC 61010-1:2001,IEC... |
Load current clamp sensors
|
|
|
Kyoritsu 2009R
|
|
CAT.IV Clamp Meter can measure the Voltage and Current in both very low and high power circuits.
•
Accurate True-RMS reading of AC current or voltage with distorted waveform.
•
Can measure AC and DC currents up to 2000A.
|
AC/DC Digital Clamp Meters
|
|
|
Kyoritsu 8030
|
|
Digital Phase Indicator with open phase checker
•
Phase indicator designed to check the presence of open phase and also the phase sequence by LED and buzzer at the same time.
•
Small, lightweight, and portable.
|
Phase Indicator
|
|
|
Kyoritsu 8148
|
|
Applicable model
5010/5020, 6310, 6315
* Cannot be used for power measurement.
|
Leakage & Load current clamp sensors
|
|
|
Kyoritsu 2413R
|
|
Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement.
•
True RMS enables an accurate measurement for distorted waveforms.
•
Measurement from mA up toAC 1000A
•
Frequency filter switch to eliminate the effect of the harmonics.
•
2 way analogue output terminal:AC current detected by transformer jaws is converted to AC and DC voltage. Output cord model 7073 (option) is... |
Leakage Clamp Meters
|
|
|
Kyoritsu 8215All Clamps demo panel
|
|
This panel demonstrates the operation of all Kyoritsu AC, AC/DC and Leakage clamp meters including the special open jaw AC/DC clamp meters like KEW FORK 2300R or KEW MATE 2000 series. It features the "actual size" photos of 3 different instruments. However for an effective demonstration, real samples of these instruments should be attached to the panel using a simple anti-theft cable supplied with the panel. This panel generates approx: 15A AC and DC, 30 mA AC of leakage current, 12V AC, 15V DC... |
Demonstration Panels
|
|
|
Kyoritsu 8143
|
|
Applicable model
5000/5001, 5010/5020, 6310
* Cannot be used for power measurement.
|
Leakage current clamp sensors
|
|
|
Kyoritsu 4300
|
|
KEW 4300 is simplified earth resistance tester (based on 2-pole method) that can be used for various distribution lines and electrical appliances and it also can measure AC/DC voltage. (As for AC Voltages, true rms values can be obtained.)
•
200/2000Ω (2 ranges): auto-ranging.
•
Warning buzzer triggered at 100Ω or less.
•
LED lights up when a large earth voltage is detected.
•
Live circuit warning when 30V or higher voltage is detected. (KEW... |
Earth Testers
|
|
|
Kyoritsu 5402D
|
|
Accurate digital readout of tripping time.
•
Two neon lamps give quick check for correct wiring.
•
Compact, lightweight and simple to operate.
•
Zero cross circuitry permits testing at 0 and 180 degree portion of sine wave. At these two tests minimum (best) and maximum (worst) trip times will be displayed.
|
RCD Tester
|
|
|
Kyoritsu 6010A
|
|
Continuity and Insulation Testing
•
Live circuit warning LED:Immediate illumination of a warning lamp if the circuit under test is live
•
Auto Discharge:Allows fast and safe discharge of electrical energy stored in capacitive circuits following testing
•
Integral overload protection on internal continuity and insulation test circuitry
•
Autoranging
•
500V DC test voltage for insulation tests
•
200mA short circuit current on... |
Multi Function Testers
|
|
|
Kyoritsu 6300
|
|
12 kinds of power measurements
Voltage (RMS), Current (RMS), active power, apparent power, reactive power, active energy, apparent energy, reactive energy, power factor (cos θ), frequency , demand measurement, current flowing on the neutral line(Only on 3 phase 4 wire measurement)
Regenerative electric power can be measured
Detection of consumption power and regenerative electric power Regenerative electric power: This is the electric power which is generated... |
Power Meter
|
|
|
Kyoritsu 8112
|
|
AC CLAMP ADAPTOR
•
Model 8112 clamp adaptor is designed to be an AC current/voltage conversion probe capable of measuring AC current from 0.1mA to 120A in conjunction with digital multimeters. Simple to operate, the unit has range switch position at 200mA,2A and 20A. It also features safety design throughout with no exposed metal parts.
|
Sensors, Multi-Trans, Clamp adaptors
|
|
|
Kyoritsu 7061
|
|
Applicablemodel
8113
•
Output Cords
•
1,100mm
|
Test Leads
|
|
|
Kyoritsu 9119
|
|
Applicablemodels
5000
5001
5010
5020
•
Carrying case [Hard]
•
327 (L) × 310 (W) × 120 (D)mm
•
Up to 3 sensors can be packed into the hard carry case.All the clamp sensors can fit in the case except for the KEW 8123 clamp sensor.(*) Combinations available can be checked here.
|
Case
|
|
|
Kyoritsu 1011
|
|
Temperature measurement, selectable for ºC and ºF
•
6040 counts with Bar Graph display
•
MIN/MAX function enables to record min & max value
•
REL(relative value) function to indicate the measurement variation
|
Digital Multimeters
|
|
|
Kyoritsu 2007A
|
|
Sleep function to save battery
•
Data hold function.
•
Digital display with maximum 4000 counts.
|
AC Digital Clamp Meters
|
|