You have 0 items in your cart.
Hioki
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
Hioki Temperature Hitester 3441, 3442 | Record Temperature Trends with ±0.1 % Accuracy The 3441 and 3442 provide high-resolution measurements across a wide range of temperatures using K type thermocouples. With its drip-proof design, the 3442 delivers extended versatility, allowing use in moisture-prone environments when used with a special-purpose temperature probe. • Model 3441 (°C only) • Model 3441-02 (°C/°F selectable) • Model 3442 (°C only, waterproof construction) These products cannot perform measurement alone.... | Environmental | Magnetic Field | Temperature & Humidity |
|
|
|
Hioki Wireless Logging Station LR8410-20 | Wireless Multi-channel Data Logger Captures Up to 105 Data Points via Bluetooth® Hioki Memory HiLoggers are high-speed data loggers for recording multiple chanels of voltage, temperature, resistance or humidity signals, some models providing complete isolation between channels and strong noise resistance. The LR8410-20 is an innovative wireless logging system capable of capturing up to 105 channels of data wirelessly using Bluetooth® technology. • LR8410-20 (Main unit with LCD screen) •... | Environmental | Magnetic Field | Temperature & Humidity |
|
|
|
Hioki Clamp on Earth Tester FT6380, FT6381 | Lightweight Ground Clamps with Bluetooth® Data Transfer The FT6380 and FT6381 measure grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load... | Ground Clamp Meters | Earth Testers | Voltage & Phase Detectors |
|
|
|
Hioki Earth HiTester 3151 | Classic Earth Resistance Tester Using 3-Pole Method Earthing or grounding of electrical equipment is essential to maintain safety, protecting lives, as well as prevent damage to equipment. The 3151 uses the AC phase differential system to measure earthing resistance, which assures that accurate measurements are unaffected by earth voltage and auxiliary earthing resistance. | Ground Clamp Meters | Earth Testers | Voltage & Phase Detectors |
|
|
|
Hioki Safety HiTester 3258 | World’s First Non-Metallic Contact Voltage Tester Measures 600V With Optimal Safety Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The 3258 is a line voltage tester that employs a coupling capacitance cancellation method to measure voltage in AC circuits without requiring metal-to-metal contact. Voltage can be measured safely at practically any location, on either insulated or exposed metal conductors. | Ground Clamp Meters | Earth Testers | Voltage & Phase Detectors |
|
|
|
Hioki Voltage Detector 3120 | Non-Metallic Contact Voltage Detector with Battery Life Indicator Hioki leads the industry in non-metallic contact test and measurement technology that promotes safety on the worksite. The 3120 is a non-metallic contact voltage detector with a power switch that also gives a clear indication of the battery state with a green LED. When voltage is detected, the LED lights red along with an audio signal. | Ground Clamp Meters | Earth Testers | Voltage & Phase Detectors |
|
|
|
Hioki Phase Detector 3129-10 | Non-Metallic Contact 70V to 1000V Phase Detector Hioki’s non-contact voltage detection and measurement technology places efficiency and safety as priority considerations with the goal of protecting customers that need to conduct on-site electrical work as part of renovations and expansions of manufacturing plants and buildings. Model 3129-10 is a non-contact phase detector that detects the phase of electrical current flow within insulated wires without the use of metallic contact voltage... | Ground Clamp Meters | Earth Testers | Voltage & Phase Detectors |
|
|
|
Hioki Phase Detector 3129 | Non-Metallic Contact 70V to 600V Phase Detector Hioki’s non-contact voltage detection and measurement technology places efficiency and safety as priority considerations with the goal of protecting customers that need to conduct on-site electrical work as part of renovations and expansions of manufacturing plants and buildings. Model 3129 is a non-contact phase detector that can detect the phase of electrical current flow within insulated wires without the use of metallic contact voltage... | Ground Clamp Meters | Earth Testers | Voltage & Phase Detectors |
|
|
|
Hioki Phase Detector 3126-01 | Classic Phase Rotation Detector The Hioki 3126-10 is a phase rotation detector with 110V to 480V detection range. | Ground Clamp Meters | Earth Testers | Voltage & Phase Detectors |
|
|
|
Hioki Clamp on Probe 3273-50 | Wideband DC to 50 MHz/30A AC/DC Current Probe for Oscilloscopes Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The 3273-50 offers a wide DC to 50 MHz bandwidth and 30A of continuous input, and is ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers. Use optional power supply 3269 or 3273 to drive the current probe when power from the Memory HiCorder... | High Frequency Sensors | CTs | Current Probes |
|
|
|
Hioki Clamp on Probe 3276 | Wideband DC to 100 MHz/30A AC/DC Current Probe for Oscilloscopes Hioki wide frequency current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The 3276 offers a wide DC to 100 MHz bandwidth and 30A of continuous input, and is ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers. Use optional power supply 3269 or 3273 to drive the current probe when power from the Memory HiCorder... | High Frequency Sensors | CTs | Current Probes |
|
|
|
Hioki Clamp on Probe 3275 | Wideband DC to 2 MHz/500A AC/DC Current Probe for Oscilloscopes Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The 3275 supports wide DC to 2 MHz bandwidth signals and 500A of continuous high input, and is ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers. Use optional power supply 3269 or 3273 to drive the current probe when power from the... | High Frequency Sensors | CTs | Current Probes |
|
|
|
Hioki Clamp on Probe 3274 | Wide band DC to 10 MHz/150A AC/DC Current Probe for Oscilloscopes Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The 3274 supports wide DC to 10 MHz bandwidth signals and 150A of continuous high input, and is ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers. Use optional power supply 3269 or 3273 to drive the current probe when power from the... | High Frequency Sensors | CTs | Current Probes |
|
|
|
Hioki AC/DC Current Sensor CT6862, CT6863 | High Precision DC to 1MHz/50A, 500kHz/200A AC/DC Pull-through Current Sensors with ±0.05% Basic Accuracy Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The CT6862 is a DC to 1MHz/50A sensor, and the CT6863 is a DC to 500kHz/200A sensor, and both are ideal for capturing current signals from switching power supplies, inverters, power conditioners, etc. | High Frequency Sensors | CTs | Current Probes |
|
|
|
Hioki Clamp on Sensor 9272-10 | 1 to 100 kHz/20-200A AC Current Probe for Measuring Inverter Equipment and Other Low Frequency Devices Hioki current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The 9272-10 is a 1 to 100 kHz AC current sensor ideal for measuring low frequency equipment such as inverters. Model 9272-10 cannot be used alone. The 9555-10 Sensor Unit must be used when connecting the probe with a Hioki Memory HiCorder. Model 9272-10 can be... | High Frequency Sensors | CTs | Current Probes |
|
|
|
Hioki AC/DC Current Sensor 9709 | High Precision DC to 100 kHz/500A AC/DC Pull-through Current Sensor with ±0.05% Basic Accuracy Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The 9709 is a DC to 100kHz/500A sensor, ideal for capturing current signals from switching power supplies, inverters, power conditioners, etc. | High Frequency Sensors | CTs | Current Probes |
|
|
|
Hioki Universal Clamp on CT 9279 | High Precision DC to 20 kHz/500A AC/DC Current Sensor with ±0.5% Accuracy Hioki AC/DC clamp sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The 9279 is a DC to 20 kHz/500A sensor, ideal for monitoring waveforms of switching power supplies, inverters, power conditioners, etc. Not CE Marked Model 9279 cannot be used alone. The 9555-10 Sensor Unit must be used when connecting the probe with a Hioki Memory HiCorder. Model 9279... | High Frequency Sensors | CTs | Current Probes |
|
|
|
Hioki Universal Clamp on CT 9277, 9278 | High Precision DC to 100 kHz/20A and 200A AC/DC Current Sensor with ±0.5% Accuracy Hioki AC/DC clamp sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The 9277 and 9278 are DC to 100 kHz/20A and 200A sensors, ideal for monitoring waveforms of switching power supplies, inverters, power conditioners, etc. Models 9277 and 9278 cannot be used alone. The 9555-10 Sensor Unit must be used when connecting the probe with a Hioki Memory... | High Frequency Sensors | CTs | Current Probes |
|
|
|
Hioki Sensor Unit 9555-10 | Power Supply Unit for Outputting Current Probe Signals Hioki pull-through current sensors and clamp on current probes are best-in-class current sensing devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The 9555-10 is a sensor unit and power adapter for any one of the CT6865 series, 9709, and 927X series current sensor and probes. | High Frequency Sensors | CTs | Current Probes |
|
|
|
Hioki Power Supply 3269, 3272 | Power Supply Unit for Outputting Current Probe Signals to Memory HiCorders and Oscilloscopes Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes. The 3272 is a single channel and the 3269 is a 4 channel power supply for outputting signals measured by the 327X Series AC/DC Clamp On Probe to the data acquisition equipment. Models 3269 and 3272 cannot be used alone. For current testing, must be paired with... | High Frequency Sensors | CTs | Current Probes |
|